



The shower is used more often than any other part of the bathroom, and it is the part most easily compromised by what can’t be seen: water pressure, drainage, waterproofing. A good shower is decided in that order. The fittings come last.
A large rainfall head, body jets, steam or two showers running at once all depend on the property’s hot-water system, pressure and flow rate. A beautiful fitting cannot compensate for an inadequate supply, so this is assessed before anything is specified. Our designers check compatibility at the outset. For the background, read our guide to plumbing systems.
A defined, fully glazed showering zone. The right choice where space is tight, where the shower sits near furniture or timber floors, or where splash containment matters most. Frameless glass keeps the room feeling open; framed, fluted or steel-framed glass makes the enclosure a feature.
Explore shower enclosures · Shop shower enclosures
A single fixed glass panel over a tray or floor former, leaving the shower open to the room. It makes a bathroom feel larger, but it needs depth: too short, and water escapes.
Explore wetroom panels · Shop walk-in panels
Further reading: Buyer’s guide to walk-in showers
The whole floor is tanked and falls to a drain, with no tray and no step. Floor and wall surfaces can run uninterrupted, which suits architectural interiors. Most wetrooms still benefit from a glass panel to keep water away from the rest of the room.
Further reading: How to create a wetroom



Where there is a tray, it deserves as much attention as the brassware. It has to drain reliably, feel secure underfoot and sit flush with the floor finish. Stone-resin trays can be made to size and colour-matched to the surrounding tiles, so the tray reads as part of the floor rather than an insert in it.
Explore shower trays · Shop shower trays
A large overhead head spreads water over the whole body rather than a single jet. Ceiling-mounted, it disappears into the architecture; wall-mounted on an arm, it is easier to install and service. Larger heads need more flow. Shop shower heads
Essential rather than optional: for rinsing, cleaning the enclosure, washing hair without wetting the rest of you. Paired with a rainfall head, they give a choice of experience. Shop hand showers
Head, hand shower and controls in a single piece, mounted on the wall. Exposed pipework suits period rooms and industrial ones equally, and needs less work behind the wall. Shop shower columns
Set at different heights along the wall, body jets add a layer of spa-style showering. They raise the demand on flow, pipework and drainage, so they are planned in from the start.



Thermostatic valves hold a set temperature regardless of other demand in the house. With several outlets, a separate control for each lets you choose and combine them. Place controls where they can be reached before stepping under the water, not beneath it.
Explore shower brassware | Shop shower valves
A steam generator turns a suitable enclosure into a private steam room, with no separate room needed. Steam needs more planning than any other shower: a sealed enclosure with a door and ceiling, a generator sized to the volume, ventilation, waterproofing, electrics and service access. It is decided at design stage, not added later.
Further reading: Before installing a steam generator
Our wellness guide covers steam, sauna and cold immersion in full.


Shower walls are among the largest surfaces in the room. Large-format tiles and stone slabs reduce grout lines and give a calmer, more architectural finish; small tiles and mosaics bring pattern and texture. Whatever the material, it must be rated for wet areas and compatible with the waterproofing beneath it.
Waterproof wallcovering is the less familiar option. Designed for wet areas, including inside the shower, it allows pattern, colour and scale that tile formats can’t, and it can run continuously from shower to the rest of the room. It suits clients who want a bathroom to feel like part of the house rather than a tiled box.
Explore waterproof wallcovering · Explore tiles
Drainage is designed to be invisible and judged by whether you notice it. Linear drains suit large-format tiles and wetrooms; a point drain can sit centrally or at one side. Capacity has to match the flow: a rainfall head with body jets can deliver far more water than a standard drain removes.
Chrome is timeless. Brushed nickel, bronze, brushed and polished brass and black all give the shower a more particular character. Coordinate the shower with the basin and bath brassware, the flush plate and the accessories, or contrast it deliberately. Consistency matters more than fashion.
Further reading: A guide to bathroom brassware



A compact room needn’t mean a compromised shower. Frameless glass keeps sightlines open, a recessed enclosure makes use of an awkward alcove, and a slim wall-mounted valve reduces clutter. Where a walk-in is wanted, the depth must be enough to keep water contained.
What is the difference between a walk-in shower and a wetroom? A walk-in shower uses a tray or floor former with a fixed glass panel. A wetroom tanks the whole floor, which falls to a drain, so there is no tray or step.
Is a rainfall shower worth it? For most people, yes, particularly paired with a hand shower. Check the property’s pressure and flow first, as larger heads need more water.
Can I have body jets and a rainfall shower together? Yes. A multi-outlet system can combine an overhead head, hand shower and body jets, provided the supply, controls and drainage are specified for it.
Can I have a steam shower at home? Yes. A suitably designed enclosure with a correctly sized generator becomes a steam shower. Ventilation, waterproofing and electrics are planned at design stage.
Can an existing shower be converted to steam? Sometimes. It depends on the enclosure’s construction, height and seal. A site assessment is needed before committing.
What is a thermostatic shower? A shower controlled by a thermostatic valve, which holds the water at a set temperature even when water is drawn elsewhere in the house.
Can waterproof wallcovering be used inside a shower? Yes, where the product is designed and approved for wet areas and installed to the manufacturer’s requirements.
Do I need a shower tray? Not always. A shower can sit on a standard or low-profile tray, or be part of a fully tanked wetroom with no tray at all.
How do I know if my water pressure is sufficient? Have the pressure and flow rate measured before choosing a system. It matters most for rainfall heads, body jets, steam and multiple showers.
Can West One Bathrooms design my shower? Yes. Our designers specify the enclosure or wetroom, drainage, controls, surfaces and finishes together, and check them against your water supply.

Try Before You Buy
Our showrooms keep an array shower units on display. Walk-ins welcome.

Layout, structure and brassware, all specified together with one of our bathroom designers.


Private appointments, video consultations and VAT-free worldwide export.